Page 1 of 1
Moving a Seeburg std-160
Posted: Tue Jan 23, 2007 10:52 pm
by fletchsm
I saw that Ron Rich has a book out that mentions moving Jukeboxes. But since I can't get a hold of it before I plan on moving this one, I was wondering if there were any general tips or problems I should be aware of?
Posted: Wed Jan 24, 2007 6:08 am
by recore
Hi
Seeing that nobody else has answere I'll take a stab at it.
Please note that I am a novice but have some knowledge, enough to be dangeous."""
Remove the records. There should be some nuts on the mechanism. On mine four that allow the mehanism to float. Tighten these down snug only. Then move it.
When it is in its new home loosen the nuts up to allow it to float, replace the records an you are in bussiness.
Hopefully someone else will answer too.
Ken
Posted: Wed Jan 24, 2007 6:03 pm
by tonymillerus
If you plan to lay it down on its back, remove the mechanism. Under no circumstances transport this machine with the mechanism in any orientation other than the normal play position.
Cheers,
Tony Miller
Posted: Wed Jan 24, 2007 6:39 pm
by fletchsm
Thanks for the quick replies, I had guessed at the not laying it down flat but nice to know if that ever needs to be done for some reason there is a way.