Page 1 of 1
wulitzer OMT 1015 45's
Posted: Fri Nov 14, 2014 4:55 am
by HAVASUGAMEMAN88
ok trying to help a friend with this machine. worked fine until it was moved. now the display will not come on the record mag will not spin. even when placed into serv. mode . dumb question were are the fuses located? trouble shoot chart leans towards a fuse but will take any input. also not sure what if any leds should be lit upon power up thanks for the help James
Re: wulitzer OMT 1015 45's
Posted: Fri Nov 14, 2014 5:50 am
by Ron Rich
James,
Fuses are "under" the amplifier cover. Ron Rich
Re: wulitzer OMT 1015 45's
Posted: Sat Nov 15, 2014 6:02 pm
by ryan69juke
James... If a fuse is blown....which is probably the case (4amp)(or whatever it calls for ) .Replace it only with a 4 amp NO MORE !!!! Have some one turn the box on watch and see if fuse blows and or turns red ! If so you probably have a dead short. I had the same problem on a OMT cd box a year or two ago . All the wires that go through the bottom of the mech were wadded up and tied together. I cut the extra tie wraps off and straighten out the ribbon cables,took out all the kinks!!! I powered it up with a new fuse and BINGO it worked !!! And is still working to this day!!!! Wurlitzer didn't take much care when routing these cables . Never did find the problem but what the heck....2 years later & still running ! Like the old saying.... "leave sleeping dogs lie " LOL . Good luck ! Ryan
Re: wulitzer OMT 1015 45's
Posted: Wed Nov 19, 2014 5:26 am
by Las Vegas Jukebox
ryan69juke wrote:Like the old saying.... "leave sleeping dogs lie " LOL . Good luck ! Ryan
Wise words, like "don't try to fix what isn't broken"!