M100A Animation motor arm.

James_Douglas · by **James_Douglas** » Sat Oct 26, 2013 1:05 am

Hi all,

I am missing the animation arm that comes off of the motor and the arm off of the tray connects to. If anyone has an "A" apart could I get you to take a photo and possible trace the arm and drop it in the mail to me so I can make one.

Thanks, James

James_Douglas · by **James_Douglas** » Sun Oct 27, 2013 11:30 pm

Hi All,

Can anyone that has a M100A tell me what the length of their animation tray is? I think mine, which was missing and purchased off eBay, is the wrong one. I am trying to put it in and it looks like it is to short.

If anyone who can tell me the length and or send me some photos of the tray, the arms, and the like I would be thankful.
Best, James

by **Ron Rich** » Mon Oct 28, 2013 4:21 pm

James,
Going from memory, it fills all but 4 inches of the space--about 2 inches on each side. Ron Rich

James_Douglas · by **James_Douglas** » Mon Oct 28, 2013 5:47 pm

Hi,

I have confirmed that the "B" is not the same as the "A". They are shorter and the arms that suspend it is different.

So, I am looking for a set from an "A" or someone who is willing to pull his out and trace the "A" arms and their attachment locations to the try. I can then cut and extend the tray I have and make the arms and linkage.

James

by **Ron Rich** » Mon Oct 28, 2013 5:56 pm

James,
Check with Victory Glass--I think they offer repro trays, arms , and all parts for this --
Ron Rich