Phonoland

After I select a song, the Juke picks a record two selections off. i.e. I press A1 and the C1 record is picked. How is this this fixed or adjusted?

Also, the stylus is shot. The part no is Rowe F13031. It appears to me to be a Shure cartrige. For some reason, I thought the M44 stylus was interchangeable, with the standard Rowe model? Would this work or should I just swap cartridges.

Thank you

Rowe used the M44-C, which tracks heavier than the others in the M44 series.

The part which senses the selection pins or coils may be improperly mouinted (cocked to one side), or it might be bent.

Hi,

Check the stop and switch assembly in the correct position.
Put the carousel into the A1 position and check that the stop plate is at the 200 mark as per the manual.

Regards

Alan Hood
ami-man
UK

Thank you gentleman. My scan problem has been solved. Everything was off by 3 selections, I found that the carousel allens were loose. slightly moved the carousel, tighten the allens and problem solved.

I found that the M44-7 stylus works in a pinch. A replacement is on order.