Page 1 of 1
rowe cd100j cd does not spin
Posted: Thu Dec 18, 2014 5:18 pm
by james1953
i have a rowe cd100j with error codes 05-53 and 05-63. the mech loads but does not spin the cd. had cd-pro rebuilt and tested. any help would be nice.
Re: rowe cd100j cd does not spin
Posted: Fri Dec 19, 2014 3:12 am
by MattTech
james1953 wrote:i have a rowe cd100j with error codes 05-53 and 05-63. the mech loads but does not spin the cd. had cd-pro rebuilt and tested. any help would be nice.
What does the service manual say about error codes?
Re: rowe cd100j cd does not spin
Posted: Fri Dec 19, 2014 7:25 pm
by james1953
reset ccc to default conditions. set to free play. ccc shows no errors, unit loads CD but does not spin CD. replaced mech control unit, no change. checked all plugs, replaced CD-Pro player with known good player(old player was CDM-12), no change in symptoms. still no errors on ccc.
Re: rowe cd100j cd does not spin
Posted: Sun Dec 21, 2014 5:43 am
by southofi-10
Time to check your cables and connections.
Make sure your gettin" the correct voltage from your mech control to the cdpro input cable.
Might need to replace your ribbon cable.
Good luck
Re: rowe cd100j cd does not spin
Posted: Sun Dec 21, 2014 10:46 pm
by james1953
i found that the CD-PRO motor was bad. replacing unit