Page 1 of 1

Rock-Ola not selecting xx4-7 numbers

Posted: Thu Jan 10, 2013 2:15 am
by Las Vegas Jukebox
Hi, my Rock-Ola 474 doesn't select any records ending with the numbers 4 through 7.

The Write-In Carriage Arm just goes round and round after pressing the third digit.

The manual seems to suggest that the K7-1 relay maybe the culprit, but I have checked/swapped the relay and all seems to be good.

Sometimes, on very rare occasions, it does work, but most often it doesn't.

Would appreciate any ideas for solving this problem.

Re: Rock-Ola not selecting xx4-7 numbers

Posted: Sat Jan 12, 2013 10:54 pm
by Las Vegas Jukebox
I was hoping that this would be one of those "common" faults, that everyone knows the answer to and is quick to fix, but having not had any responses I guess not.

If anyone has any ideas at all what could cause this fault and where I should be looking I would be very grateful.

Re: Rock-Ola not selecting xx4-7 numbers

Posted: Sat Jan 12, 2013 11:47 pm
by Ron Rich
Keith,
I have seen similar problems--in the keyboard, make sure the contacts are good AND, when held down for the last digit, the button is held far enough down to make good contact. Check all plugs in the selection system--if any are the long, flat, black type, that slide onto a PCB, that's probably your problem, as they are no good--crack at edges, and fail to make good contact.
HTH, Ron Rich

Re: Rock-Ola not selecting xx4-7 numbers

Posted: Sun Jan 13, 2013 5:35 am
by Las Vegas Jukebox
Thanks Ron, I went through everything you mentioned and it worked. I think it was the button contacts.

Re: Rock-Ola not selecting xx4-7 numbers

Posted: Sun Jan 13, 2013 8:15 pm
by Ron Rich
Keith,
Glad it worked--
Ron Rich