Page 1 of 1
Seeburg LS1 write in problems
Posted: Mon Mar 07, 2011 5:49 am
by 89pin
I am new to this but do have experience with pinball machines and do learn quickly. Anyway, I have a seeburg ls1. And when a selection is made the noturious scans twice and dose nothing problem occurs. When i trigger the lever manually it picks up the 45 and plays all the way though, returns it and then same old problem when another selection is made. I tried the battery trick did nothing (perhaps im doing it wrong?) and have no voltage at the "write in" test points on the control center. Where should i start before i spend unessary money? Fuses? electronic components? I do have a service maual on hand. Any help is great. Thanks
Re: Seeburg LS1 write in problems
Posted: Mon Mar 07, 2011 7:34 pm
by Ron Rich
Hi Pin man,
Start by telling me which Solid State Control Center is installed in that phono--- Ron Rich
Re: Seeburg LS1 write in problems
Posted: Mon Mar 14, 2011 5:43 am
by 89pin
Sorry for the late response. I was tied up with flooding. Anyway. Pin man? I like that one.
No jukes or pins lost. It has a scc7 in it.
Re: Seeburg LS1 write in problems
Posted: Mon Mar 14, 2011 10:10 pm
by Ron Rich
Pin Man---
You need to find out where that Write in voltage has flown too--Check the 150 VZD--
Ron Rich
Re: Seeburg LS1 write in problems
Posted: Mon Mar 21, 2011 5:46 am
by 89pin
Finally got my basement all together after a flood. I'm sorry i sound stupid, I'm still learning. Please clarify "flown too" you mean something shorted and it's sending the voltage else where?
Re: Seeburg LS1 write in problems
Posted: Mon Mar 21, 2011 6:59 am
by Ron Rich
I mean "disappeared" where too?--that's what needs to be determined-- Ron Rich
Re: Seeburg LS1 write in problems
Posted: Tue Mar 22, 2011 4:28 am
by 89pin
ok, thanks. tomorrow ill hook it all up and see where i can find it.
Re: Seeburg LS1 write in problems
Posted: Tue Mar 22, 2011 4:54 am
by Ron Rich
Pull the SCC-7 out of the phonograph and check the test points on it-- Ron Rich