Rockola 445 parts source?

Q&A about all types of jukeboxes: Wurlitzer, Seeburg, Rock-Ola, AMI, and more.



Topic author
mjhanna
Junior Member
Posts: 2
Joined: Sat Dec 11, 2010 6:49 am

Rockola 445 parts source?

by mjhanna » Sat Dec 11, 2010 7:23 am

Hi! New to the board and to trying to work on a Rockola 445 that I have had stored for over ten years. It stopped working and we put it away. Most functions seem to be working so far, but I have a broken part in the selector system.It is called a "carriage housing" part # 34364-1, and is a black plastic housing which has a series of metal parts mounted to it. The entire "carriage assembly" part # 41566-A, is also listed in the parts diagram.

If anyone has either of these available, or can steer me to a good possible source, it will be much appreciated. Once we get this working, I can see how much more work there may be to do.

I would also appreciate suggestions on what type of lubricant I should be using throughout this unit. I have be told a silicone spray lubricant is best, but thought I would ask here to confirm. Thanks!!! Mark


Ken Layton
Senior Member
Posts: 292
Joined: Sun Jun 07, 2009 8:06 pm
Location: Olympia, Washington USA

Re: Rockola 445 parts source?

by Ken Layton » Sat Dec 11, 2010 8:14 am

Victory Glass bought out the entire inventory of new old stock Rockola vinyl jukebox parts a few years ago.

www.victoryglass.com

Part number 34364-1 Carriage Housing has been replaced by # 48924 Carriage Housing (Victory Glass stock # 80-5921). Sells for $35.

Be advised that besides the part number changing over the years, so did the color of the part. It went from black to gray and finally to blue plastic.


Ron Rich
Forum Moderator
Posts: 8195
Joined: Sun May 06, 2007 11:31 pm
Location: Millbrae (San Francisco area)CA, USA

Re: Rockola 445 parts source?

by Ron Rich » Sat Dec 11, 2010 9:38 am

I would stay away from any "spray" lubes--they tend to get where they are not wanted--
I use only SAE # 20 wt. ND Motor oil. Ron Rich


Topic author
mjhanna
Junior Member
Posts: 2
Joined: Sat Dec 11, 2010 6:49 am

Re: Rockola 445 parts source?

by mjhanna » Sat Dec 11, 2010 3:09 pm

Thanks fellas! This will get me started, and I have no doubt I'll be back for more after the holidays.

Who is online

Users browsing this forum: Google Adsense [Bot], Jimmler, Larry Wilson, Yahoo [Bot] and 15 guests

It is currently Thu Oct 06, 2016 8:07 pm