AY160 Mechanism (160ST5) Loose Wire

BigBird0000 · by **BigBird0000** » Fri Oct 18, 2013 11:12 pm

I almost have my bucket of parts together. On the top left of my mechanism (160ST5) is a white wire - connected to ground on one side, hanging in mid-air on the other.

Can anyone tell me where to connect the other side of this wire to?
[see attached image]

SteveFury · by **SteveFury** » Sat Oct 19, 2013 12:40 am

Maybe the favorites counter solenoid? That's my guess.

CoinOpCollector · by **CoinOpCollector** » Sat Oct 19, 2013 1:01 am

Already have the two wires to the pop meter.

BigBird0000 · by **BigBird0000** » Sat Oct 19, 2013 4:29 pm

From various readings, I am beginning to think this wire is to ground the mechanism cover.

Where? How?

by **Ron Rich** » Sat Oct 19, 2013 5:42 pm

Bird,
You are correct--should be a very small Phillips screw on the top of mech cover that the wire needs to be attached to. At one time, that wire had an attaching lug there. Ron Rich

CoinOpCollector · by **CoinOpCollector** » Sat Oct 19, 2013 6:10 pm

I found the point where it should connect on the cover!!
Attached in case someone else ever needs this info!

Thanks Ron!! Saved me from a possibly fatal situation!