NSM Carriage wony stop moving and wont play full record.

Hi I am looking for an NSM City 2 working carriage or a working carriage board. Or any advice on My Carriage and why its not stopping. The carriage keeps going back and forth non stop. I ccan make selections and it will select the correct record and start to play it then reject it and start moving again non stop until i make another selection. I did oil the mech according to the specs and checked that both micro switches are working on the mech, With both switches working it makes no sense to me why the carriage wont stop scanning, Any help would be appreciated..

Thanks Lenard

Hi
Might be a problem with the scan relay FA, although the usual problem would be that the carriage won't scan, the relay is located on the control centre
clones

Clone, Thanks for the reply:

I took the board off of the mech and found a melted Power Transistor BC327 -16, Now I need to find this one and hope it fixes the issue. I would rather locate another board for the mech if anyone knows where to get one please let me know.

Thanks Lenard

Boh6368 wrote:Clone, Thanks for the reply:

I took the board off of the mech and found a melted Power Transistor BC327 -16, Now I need to find this one and hope it fixes the issue. I would rather locate another board for the mech if anyone knows where to get one please let me know.

Thanks Lenard

Well I got the transistor replaced and that did not do anything. Its doing the same thing any other ideas would be appreciated

There's a reason WHY the trasistor failed - replacing it doesn't cure the problem.

Well I mailed my carriage board and CCU away to someone who specializes in NSM Repair, Waiting to hear back whats wrong and the price to repair it. I'll keep you all posted.

Well I got the board back from George Sammons and only cost 94$ to get it fixed and working. it was missing some capacitors and resistors and some were bad. But he did a great job. And the board works perfect now.

Thanks George