I need help to fix my rowe ami cd100,

I got a rowe ami cd100 jukebox that don't work
I don't know anything about them. But it says out
of order on the screen & system error light is blinking can anyone help me?

If you have electro/mechanical skills, you need to purchase and read the Service manual. (see announcements section above--where to find---).
One quick "trick" to try -- reboot the CCC. To do this-- turn power off and service on--hold keyboard buttons Zero, and 0ne down, turn power on --hold buttons till screen says "errors exist"-- Ron Rich

Thanks Ron!
I did that it still wont do anything the screen has 0 on it now then it went back to out of order & the
Board error light is on & system light is blinking.
I will have to get a manual, is there a certain manual I should get? Thanks again

You can use about any Rowe CD jukebox book. To start, you have a power problum.

Board error light--on which board-- also, can you ID the CDM and Power Supply, in your phono--
The later books are better--but, may or may not be useful unless you know which player is installed--
Ron Rich

The board error indication may be on the Mechanism Control Unit but as Ron says we need to know what laser and control boards are fitted, the option are CDM3, CDM4, CDM12, CDMPRO.

Regards
Alan

Alan Hood
ami-man
UK

The light is on the ccc, I cant find what player it is.
Where is the number @? Would the serial number
Help @ all?

No--serial number is meaningless,as it could/should have been updated--power supply type would be helpful-
Are all three LED on the PS lit ?
Can you post a photo of the player ?
Ron Rich

It has 0 on the screen & it will say checksum=dc00
Then arm test passed then back to 0. If that helps @
all

Its not letting me post the pics

If you mean "ram" test, not "arm" test past--your phono is working as it should ? Are you sure it shows a "board error" ?
Ron Rich

Is the power sulp. On the side of the player?
If so it has 4 lights by the front & 2 lights in
back. Only 2 of the 4lights are on, board error &
5 vdc. The rest are off.

There is also in back a box. Oba-2control unit it has
2 lights on, +5vdc & +24vdc

Oh it did say ram test passed Sorry but it went back to
Saying out of order & board error on the ccc

Please--purchase and read the Service Manual--then, if you can not find the answers in the book, get back to us using terms in the manual--Or call a "pro"--
Ron Rich