Jukebox speakers

Q&A about all types of jukeboxes: Wurlitzer, Seeburg, Rock-Ola, AMI, and more.



Topic author
claysred
Junior Member
Posts: 7
Joined: Mon Dec 13, 2010 3:19 pm
Location: Houston, Texas

Jukebox speakers

by claysred » Sun Jan 27, 2013 7:58 pm

I have some Rowe CD jukebox model C's, D's & F's that could use some new woofer speakers. Other than my Rowe dealer, are there any good sources for woofer speaker replacements? I have some external speaker boxes that could use woofer replacements also. Are these jukebox speakers "special", or do I just need to match the ohm's numbers on the magnet?

Thanks!
Clay


Ron Rich
Forum Moderator
Posts: 8196
Joined: Sun May 06, 2007 11:31 pm
Location: Millbrae (San Francisco area)CA, USA

Re: Jukebox speakers

by Ron Rich » Sun Jan 27, 2013 10:47 pm

I would re-cone them rather then replace them--if you had listed your location in your profile, I, or someone near you may have been able to refer you to a re-coner, that has done a good job-- Ron Rich


ami-man
Forum Moderator
Posts: 984
Joined: Mon Apr 24, 2006 3:43 pm
Location: Sheffield UK

Re: Jukebox speakers

by ami-man » Mon Jan 28, 2013 2:32 pm

Hello Clay,

I totally agree with Ron get your speakers repaired.
You may find the cones and voice coils are ok and it is just the foam surround that has rotted, if this is the case then there are a number of foam kits that you can purchase to do the job yourself or send them to a company to have it done.

Regards
Alan

Alan Hood
ami-man
UK


Topic author
claysred
Junior Member
Posts: 7
Joined: Mon Dec 13, 2010 3:19 pm
Location: Houston, Texas

Re: Jukebox speakers

by claysred » Mon Jan 28, 2013 3:06 pm

@ Ron.........Location info updated.

@ Alan.......Do you know where I can buy these cone kits?

Thanks to both of yall for the reply!!

Clay


Topic author
claysred
Junior Member
Posts: 7
Joined: Mon Dec 13, 2010 3:19 pm
Location: Houston, Texas

Re: Jukebox speakers

by claysred » Mon Jan 28, 2013 3:09 pm

@ Ron.........Location info updated.

@ Alan.......Do you know where I can buy these cone kits?

Thanks to both of yall for the reply!!

Clay

User avatar

Jimmler
Regular Member
Posts: 58
Joined: Fri Dec 28, 2012 9:51 pm
Location: Nipomo, CA, USA

Re: Jukebox speakers

by Jimmler » Mon Jan 28, 2013 4:34 pm

I just re-foamed the 12" woofers and 6" midrange on my NSM Galaxy CD box and it sounds awesome!

I used these people: http://www.wooferrepair.com

The kit comes with a pair of replacement foam surrounds, glue, brush, Q-tips, cone shims, dust caps, AND a DVD to show you how to do it. I have no financial relationship with them, just a satisfied and repeat customer.

Good luck!

-Jim


ami-man
Forum Moderator
Posts: 984
Joined: Mon Apr 24, 2006 3:43 pm
Location: Sheffield UK

Re: Jukebox speakers

by ami-man » Mon Jan 28, 2013 6:55 pm

Hello Clay,

The site that Jim has listed looks alright, there are a few on Ebay.
You do have to measure the profile of the surround to make sure that it will fit your speaker, most are ok. When you get on the sites just check all of the measurments with your surrounds.

I agree the results are very good.

Regards
Alan

Alan Hood
ami-man
UK


Rob-NYC
Senior Member
Posts: 1844
Joined: Sun Sep 25, 2011 3:05 am
Location: Manhattan, NYC USA

Re: Jukebox speakers

by Rob-NYC » Tue Jan 29, 2013 4:51 am

I do agree with the suggestion that the woofers be refoamed if at all possible. That is a bass-ported enclosure and speaker characteristics are more important than they would be on a simple sealed box (acoustic suspension).

The one speaker change I made on the three Rowe CD machine I had out was to replace the crappy sounding piezo tweeters with Pyle D358 dome tweeters. These are highly efficient 1" domes and they really made the highs much more transparent -even with that rather hard, PA type amp Rowe uses. One note is that you will need to add a second-order (12 db/octave) filter is you use them in these machines. The mounting flanges are plastic and easily redrilled to mount in the same holes as the piezos.

I don't know if the D358 is still available, I used them on all my installations including ceiling speakers during the 1990's. If not, there should be something similar available in the high-end car audio lines.

Rob/NYC
"If we believe absurdities, we shall commit atrocities" -- Voltaire

Who is online

Users browsing this forum: Bing [Bot], highriverguy, Yahoo [Bot] and 13 guests

It is currently Thu Oct 06, 2016 10:03 pm